Clarion DXZ668RMP Owner's Manual page 27

Operations Common to Each Mode
2-1. Select " AUX/TEL".
3-1. Turn the [ROTARY] knob to select "AUX" or
"TEL".
• AUX :
AUX/TEL input cable is for external Audio
input.
• TEL :
AUX/TEL input cable is for cellular phone
audio input.
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗ The factory default setting is "MID".
2-1. Select " AUX SENS".
3-1. Turn the [ROTARY] knob to select "LOW",
"MID" or " HIGH".
Setting the car speaker output for the
cellular phone
∗ The factory default setting is "RIGHT".
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
2-1. Select " TEL-SP".
3-1. Turn the [ROTARY] knob to select "RIGHT"
or "LEFT".
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.
Cellular phone interrupt setting
If you connect this unit and your cellular phone with
a separately sold cable, you can listen to your
telephone calls on your car speakers.
∗ The factory default setting is "OFF".
2-1. Select " TEL-SW".
3-1. Turn the [ROTARY] knob to select the
setting. Each time you turn the [ROTARY]
knob, the setting changes in the following
order:
"OFF" "ON" "MUTE"
• OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
2-1. Select "
3-1. Press the [
3-2. Keep driving speed 50km/h and press the
3-3. "CALIBRATION" is flush for 2 seconds in
3-4. If calibration is successful display indicate
3-5. If you failed, repeat steps 3-1 to 3-4.
Note:
• When installing this device or transferring it into
another vehicle, for the sake of safety, always
have this work done by the store of purchase or
your nearest Clarion dealer. Installation requires
specialized techniques and experience.
2-1. Select "
3-1. Turn the [ROTARY] knob to make the
Note:
• As calibration is successful display and
"SUCCESSFUL" lights up in the display,
"A-VOL" can be selected.
2-1. Select "
3-1. Press and hold the [
"OFF"...
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
• MUTE:
The sound from this unit is muted during
telephone calls.
Setting auto volume
CALIBRATE
] button and "START" is
displayed.
[ ] button.
display.
"SUCCESSFUL", or if calibration is not
successful display indicate "FAILED".
Setting auto volume sensitivity
A-VOL".
adjustment.
The adjustment steps are below 6 steps,
"LOW" "MID-LOW"
"MID-HIGH" "HIGH"
Performing a system check
SYSTEM
second or longer.
"SYSTEM CHECK" appears in the display,
then the unit returns to the previous
operation mode.
".
"MID"
"OFF"
".
] button for 1
27
DXZ668RMP