Operations; Basic Operations - Clarion DXZ735MP DXZ735MP DXZ735MP Owner's Manual

7. OPERATIONS

Note:Be sure to read this chapter referring to the front diagrams of

Basic Operations

CAUTION
Be sure to lower the volume before switch-
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If you
switch the power off with the volume up,
when you switch the power back on, the sud-
den loud volume may hurt your hearing and
damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [FNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [FNC] button for 1 second
or longer to turn off the power for the unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, "SYSTEM CHK" and "Push POWER"
appear in the display alternately, so press the
[FNC] button. The system check starts within the
unit. When the system check is complete, press
the [FNC] button again.
Selecting a mode
1. Press the [FNC] button to change the opera-
tion mode.
2. Each time you press the [FNC] button, the
operation mode changes in the following or-
der:
Radio mode ➜ CD/MP3/WMA mode ➜ CD
changer mode ➜ MD changer mode ➜ DVD
changer mode ➜ TV mode ➜ AUX mode ➜
Radio mode...
∗ External equipment not connected with
CeNET is not displayed.
12
DXZ735MP
chapter "3. CONTROLS" on page 5 (unfold).
Adjusting the volume
Turning the [ROTARY] knob clockwise increases
the volume; turning it counterclockwise de-
creases the volume.
∗ The volume level is from 0 (minimum) to 33 (maxi-
mum).
Switching the display
Press the [D] button to select the desired display.
Each time you press the [D] button, the display
switches in the following order:
Main display
Clock display
Main display
∗ Once selected, the preferred display becomes
the display default. When a function adjust-
ment such as volume is made, the screen will
momentarily switch to that function's display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
∗ When you have entered a title in a CD, it ap-
pears in the main display. If you have not en-
tered a title, "NO TITLE" appears in the title
display instead. For information on how to en-
ter a title, refer to the subsection "Entering
titles" in section "Operations Common to
Each Mode".
Setting the Z-Enhancer Plus
This unit are provided with 3 types of sound tone ef-
fects stored in memory. Select the one you prefer.
∗ The factory default setting is "Z+ OFF".
Each time you press the [Z+] button, the tone ef-
fect changes in the following order:
"Z+ OFF" ➜ "BASS BOOST" ➜ "IMPACT" ➜
"EXCITE" ➜ "CUSTOM" ➜ "Z+ OFF" ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble empha-
sized
• EXCITE : bass and treble empha-
sized mid de-emphasized
• CUSTOM : user custom
• Z+ OFF : no sound effect
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-En-
hancer Plus mode to adjust.
2. Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; tuning it counterclockwise adjusts
in the – direction.
●When "B-BOOST 0" selected, you can ad-
just the bass in the range of –3 to 3.
●When "IMPACT 0" selected, you can adjust
the bass and treble in the range of –3 to 3.
●When "EXCITE 0" selected, you can adjust
the bass and treble in the range of –3 to 3.
∗ When Z-Enhancer Plus is selected, press and
hold the [Z+] button for 1 second or longer to
change to the "CUSTOM" mode.
Bass/treble characteristics become flat and
the indication "Z+FLAT" is shown in the dis-
play.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
●When "BASS BOOST" is set
"B-BOOST" ➜ "BAL 0" ➜ "FADER 0" ➜
Last function mode.
●When "IMPACT" is set
"IMPACT" ➜ "BAL 0" ➜ "FADER 0" ➜ Last
function mode.
●When "EXCITE" is set
"EXCITE" ➜ "BAL 0" ➜ "FADER 0" ➜ Last
function mode.
●When "CUSTOM" is set
"BASS" ➜ "TREBLE" ➜ "BAL 0" ➜ "FADER
0" ➜ Last function mode.
●When "Z+ OFF" is set
"BAL 0" ➜ "FADER 0" ➜ Last function
mode.
Basic Operations
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "BASS".
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is "B Å Å Å Å GAIN 0 Î Î Î Î ".
Å Î
(Adjustment range: –6 to +8)
3. Press the [d] or [a] button to select
"B FREQ 50 ".
Å Å Å Å Å Î Î Î Î Î
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is "B Å Å Å Å Å FREQ 50 Î Î Î Î Î
(Adjustment 50/80/120 Hz)
4. Press the [d] or [a] button to select "B Q 1
Å Å Å Å Å
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗ The factory default setting is "B Q 1 ".
Å Å Å Å Å Î Î Î Î Î
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "TREBLE".
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗ The factory default setting is "T GAIN 0 ".
Å Å Å Å Å Î Î Î Î Î
(Adjustment range: –6 to +6)
3. Press the [d] or [a] button to select
"T FREQ 12K ".
Å Å Å Å Å Î Î Î Î Î
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is "T FREQ 12K
Å Å Å Å Å
(Adjustment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
DXZ735MP
".
".
Î Î Î Î Î
".
Î Î Î Î Î
13