Product Configuration - udir/c UD1601PRO Operating Instructions Manual

● Please read and observe all precautions before use. Improper use of battery may
cause danger.
● It is normal for the battery to heat up after operation. Please be careful when
handling the battery. If the wire is worn, it is easy to short circuit and cause fire.
● Wasted li-ion battery must not be placed with household trash. please contact
local environmental or waste agency or the supplier of your model or your
nearest li-ion battery recycling center.
1) After use, please disconnect the power supply and pull out the plug;
BATTERY
2) Remove the battery from the model before charging;
SAFETY
3) DO NOT charge the battery when it is bulging or expanding;
4) Keep away from damp, corrosive environment and heat source;
5) Please charge the battery under adult supervision;
6) Pay attention to the polarity of the battery when installing or replacing the battery;
7) Different types of batteries or old and new batteries should not be mixed;
8) DO NOT short circuit any terminals;
9) DO NOT short circuit, decompose or put the battery into fire;
10) Please use the attached special charger to charge the battery.
UD1601PRO
Body
(Subject to the actual product)
Transmitter
Drift tires
Cross screwdriver

Product Configuration

UD1601PRO
Chassis
(Subject to the actual product)
Operating Instructions
Steering linkage
UD1602PRO
Body
(Subject to the actual product)
Lithium-ion Battery pack
Hexagon nut wrench
04
UD1602PRO
Chassis
(Subject to the actual product)
Charger
Hex wrench