Clarion DXZ666MP Owner's Manual page 15

Basic Operations
For details, refer to the subsection "Turning the
screen saver function on or off" in section
"Operations Common to Each Mode."
When the power is turned off
1. Each time you press the [D] button, the clock
time appears or disappears in the display.
Setting the Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored in memory. Select the one
you prefer.
∗ The factory default setting is "OFF".
Each time you press the [Z] button, the tone
effect changes in the following order:
"OFF" "BASS BOOST"
"EXCITE" "OFF" ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble emphasized
• EXCITE : bass and treble emphasized
mid deemphasized
• OFF : no sound effect
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
When "BASS BOOST" is set
"BALANCE 0" "FADER 0"
function mode.
When "IMPACT" is set
"BALANCE 0" "FADER 0"
function mode.
When "EXCITE" is set
"BALANCE 0" "FADER 0"
function mode.
When "OFF" is set
"BASS 0" "TREB 0"
"FADER 0" Last function mode.
"IMPACT"
Last
Last
Last
"BALANCE 0"
Adjusting the bass
The bass gain can be adjusted as follows.
1. Press the [A-M] button and select "BASS 0".
2. Turn the [ROTARY] knob to adjust the gain,
–6 to 7 (The factory default setting is "0").
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble
The treble gain can be adjusted as follows.
1. Press the [A-M] button and select "TREB 0".
2. Turn the [ROTARY] knob to adjust the gain,
–6 to 6 (The factory default setting is "0").
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select
"BALANCE 0".
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the right
speaker; turning it counterclockwise
emphasizes the sound from the left speaker.
∗ The factory default setting is "0". (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select "FADER 0".
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
speakers.
∗ The factory default setting is "0". (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Note:
• During A-M adjustment mode, if no operation is
performed for more than 7 seconds, this mode
can be cancelled and return to previous mode.
15
DXZ666MP