Related Manuals for BraunAbility P-LBS
Summary of Contents for BraunAbility P-LBS
- Page 1 PIN STATIC SEAT BELT OCCUPANT RESTRAINT User Manual Applicable to product P-LBS UI12360A Instructions for fitting and use...
- Page 2 If you have any questions about your equipment, please contact us. Once again, thank you for placing your confidence in our products! Safe vehicle adaptation solutions For your safety BraunAbility products are designed and tested according to current directives and standards.
- Page 3 PIN Static Seat Belt Safety information Limitation of use General guidance Before installing and using the retractable tie-downs Fit and use Fitting and using the occupant restraint kits Figures demonstrating fit and use After care Equipment storage and maintenance Warranty ”Declaration of conformity”...
-
Page 4: Safety Information
PIN Static Seat Belt Safety information Limitation of use The development of BraunAbility kits is a continuous process. Applications are added on a regular basis. For more details contact BraunAbility or look on the BraunAbility website. - Page 5 PIN Static Seat Belt P-LBS P-STK...
-
Page 6: General Guidance
PIN Static Seat Belt General guidance • Wheelchair Accessories that have not been approved by the Wheelchair Manufacturer must be removed from the wheelchair and secured in the vehicle during transport to reduce the potential for injury. Refer to ‘Instructions For Use in Transport’ provided with the wheelchair or contact wheelchair manufacturer for further guidance. - Page 7 Anchorages should not be installed into unsound materials such as corroded metal, wood, plastic and fiber glass panels, without additional and suitable reinforcement. • The equipment has been tested in a configuration recommended by BraunAbility and any deviation from the recommendations here is the responsibility of the installer/user.
- Page 8 PIN Static Seat Belt Before installing the occupant restraint kits • Ensure that the wheelchair is correctly maintained and that the settings of any adjustable parts are made according to ‘Instructions for Use in Transport’. • Whenever possible remove any items of luggage etc. that may be attached to the wheelchair and secure or store separately during transport in order to reduce the potential for injury to other passengers traveling in the vehicle.
- Page 9 PIN Static Seat Belt • Wheelchair users, their caregivers and family are advised to check vehicle specifications to ensure that sufficient floor space is available to accommodate the wheelchair and tie-down system. These distances are based upon the desire to maintain clear zones for potential head excursions of occupants provided with both upper and lower torso restraints.
- Page 10 Fit and use Fitting the occupant restraint kits • BraunAbility recommends the use of a 3-point occupant restraint system to provide greater protection in case of an impact. However, we also recognize that some vehicle layout/designs or specific postural or medical conditions do not allow certain styles of seatbelts to be used easily.
- Page 11 PIN Static Seat Belt Fit and use PIN 3 point occupant belt The 3rd point upper anchorage will have been installed in the vehicle in Removing the occupant restraint accordance with our own and the vehicle converter’s instruction. Disconnect the female connector Connect the female connector, of the lap belt with tongue to the wheelchair point from the male connector tie-down with the male connector, (Fig.
- Page 12 PIN Static Seat Belt Fit and use MATERIAL DRAWN BY DATE CONFIDENTIAL PROPRIETARY INFORMATION MATERIAL DRAWN BY DATE CONFIDENTIAL PROPRIETARY INFORMATION DO NOT COPY WITHOUT PERMISSION OF DO NOT COPY WITHOUT PERMISSION OF MATERIAL SPEC APPROVED BY DATE MATERIAL SPEC APPROVED BY DATE MARTOCK, SOMERSET TA12 6EY...
- Page 13 PIN Static Seat Belt Wheelchair reference plane Preferred Zone Optional Zone 30° 45° 75° 300mm 15° 15° (12in) REAR VIEW SIDE VIEW Figure 2...
- Page 14 PIN Static Seat Belt Fit and use PIN 2 point occupant lap belt Connect the female connector, of the lap belt with tongue to the wheelchair Removing the occupant restraint tie-down with the male connector, (Fig. 3A). Connect the female connector, of the lap belt with buckle to the wheelchair tie-down with male connector, (Fig.
- Page 15 PIN Static Seat Belt Wheelchair reference plane Preferred Zone Optional Zone 30° 45° 75° 300mm 15° 15° (12in) REAR VIEW SIDE VIEW Figure 2 MATERIAL DRAWN BY MATERIAL DATE DRAWN BY DATE CONFIDENTIAL PROPRIETARY INFORMATION CONFIDENTIAL PROPRIETARY INFORMATION DO NOT COPY WITHOUT PERMISSION OF DO NOT COPY WITHOUT PERMISSION OF MATERIAL SPEC APPROVED BY...
- Page 16 PIN Static Seat Belt Fit and use Classic 2 point occupant lap belt Connect the tongue, of the lap belt with tongue to the wheelchair tie-down Removing the occupant restraint buckle, (Fig. 4A). Connect the tongue, of the lap belt with buckle to the wheelchair tie-down buckle, (Fig.
- Page 17 PIN Static Seat Belt Wheelchair reference plane Preferred Zone Optional Zone 30° 45° 75° 300mm 15° 15° (12in) REAR VIEW SIDE VIEW Figure 2 MATERIAL DRAWN BY MATERIAL DATE DRAWN BY DATE CONFIDENTIAL PROPRIETARY INFORMATION CONFIDENTIAL PROPRIETARY INFORMATION DO NOT COPY WITHOUT PERMISSION OF DO NOT COPY WITHOUT PERMISSION OF MATERIAL SPEC APPROVED BY...
- Page 18 • If the vehicle is involved in an accident when any restraints are deployed, remove them from service and replace immediately. If in doubt please contact BraunAbility.
-
Page 19: Declaration Of Conformity
Declaration of conformity Manufacturer / Conforms to following directives standards and regulations / BraunAbility UK Ltd Unwin House 214/2013/ EU Paragraphs 2.3.1 and 2.3.2 The Horseshoe Coat Road ISO 10542:2012 Martock, Somerset, TA12 6EY, RESNA WC-4 2012 Section 18 2001/85/EC R.107.06... -
Page 20: Warranty
BraunAbility products when used in conjunction with such jointly tested systems. For further details on specific applications please contact the Sales Office. In other situations, using BraunAbility products, for which BraunAbility has not participated in a joint test program, a limited BraunAbility warranty will apply. - Page 21 Accredited by URS as testing laboratory in accordance with ISO/IEC 17025:2005 Quality system certified in accordance with ISO 9001:2008 Illustrations, descriptions and specifications in the user manual are based on current product information. BraunAbility UK Ltd reserves the right to make alterations without previous notice. © 2021 BraunAbility UK Ltd...
- Page 22 BraunAbility UK Ltd Unwin House Phone: +44 1935 827740 The Horseshoe, Coat Road Email: info@braunability.eu Martock, Somerset, TA12 6EY, www.braunability.eu...