Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BraunAbility KIT 8
Summary of Contents for BraunAbility KIT 8
- Page 1 KIT5 & KIT 8 User Manual Instructions for fitting and use...
- Page 2 If you have any questions about your equipment, please contact us. Once again, thank you for placing your confidence in our products! Safe vehicle adaptation solutions For your safety BraunAbility products are designed and tested according to current directives and standards.
- Page 3 KIT5 & KIT8 Safety information Limitations of use General guidance Before fitting the wheelchair & occupant restraint kits Fit and use Fitting the wheelchair & occupant restraint kits 10-15 Front tie-downs - KIT5 Rear tie-downs - KIT5 Occupant restraints - KIT5 & KIT8 Front tie-downs - KIT8 Rear tie-downs- KIT8 After care...
-
Page 4: Safety Information
KIT5 & KIT8 Safety information Limitation of use The development of BraunAbility kits is a continuous process. Applications are added on a regular basis. For more details contact BraunAbility or look on the BraunAbility website. - Page 5 KIT5 & KIT8 KIT5 KIT8...
-
Page 6: General Guidance
KIT5 & KIT8 General guidance • Wheelchair Accessories that have not been approved by the Wheelchair Manufacturer must be removed from the wheelchair and secured in the vehicle during transport to reduce the potential for injury. Refer to ‘Instructions For Use in Transport’ provided with the wheelchair or contact wheelchair manufacturer for further guidance. - Page 7 • The equipment has been tested in a configuration similar to that recommended by BraunAbility, and any deviation from the recommendations here is the responsibility of the installer/user.
- Page 8 KIT5 & KIT8 Before fitting the wheelchair & occupant restraint kits • Ensure that the wheelchair is correctly maintained and that the settings of any adjustable parts are made according to ‘Instructions for Use in Transport’. • Whenever possible remove any items of luggage etc that may be attached to the wheelchair and secure or store separately during transport in order to reduce the potential for injury to other passengers travelling in the vehicle.
- Page 9 KIT5 & KIT8 • Wheelchair users, their carers and family are advised to check vehicle specifications to ensure that sufficient floor space is available to accommodate the wheelchair and tie-down system. These distances are based upon the desire to maintain clear zones for potential head excursions of occupants provided with both upper and lower torso restraints.
- Page 10 KIT5 & KIT8 Fit and use Fitting the wheelchair & occupant restraint kits - KIT5 Front tie-downs Removing the front tie-down IMPORTANT: First remove the rear The rail will have been installed in the vehicle in accordance with our own and tie-downs, as instructed on pages 12 the vehicle converter’s instruction.
- Page 11 KIT5 & KIT8 Figure 1 Figure 2 Figure 3 Figure 4...
- Page 12 KIT5 & KIT8 Fit and use Fitting the wheelchair & occupant restraint kits - KIT5 Rear Tie-downs Removing the rear tie-down IMPORTANT: First remove Place the combined rear webbing restraint into the rail behind the wheelchair. occupant restraint, as instructed It is acceptable to use the restraint for either left-hand or right-hand use.
- Page 13 KIT5 & KIT8 Figure 1 Figure 5 Figure 6 Figure 4 Figure 7 Figure 8...
- Page 14 KIT5 & KIT8 Fit and use Fitting the wheelchair & occupant restraint kits - KIT5 & KIT8 Occupant restraints Removing the occupant restraint Before fitting the occupant restraint, ensure that the reversible stalk orange button is Release the grey shoulder belt facing outside in relation to the wheelchair.
- Page 15 KIT5 & KIT8 Figure 11 Figure 9 Figure 10 Figure 12...
- Page 16 KIT5 & KIT8 Fit and use Using the wheelchair & occupant restraint kits - KIT8 Front tie-downs Removing the front tie-down The Solo floor anchors will have been installed in the vehicle in accordance with IMPORTANT: First remove the rear tie-downs, as instructed on pages 18 their own and the vehicle converter's instruction.
- Page 17 KIT5 & KIT8 Figure 2 Figure 14 Indent Figure 4 Figure 3 Protrusion Figure 13...
- Page 18 KIT5 & KIT8 Fit and use Using the wheelchair & occupant restraint kits - KIT8 Rear tie-downs Removing the rear tie-down Place the combined rear Quattro restraint behind the wheelchair. It is acceptable IMPORTANT: First remove occupant restraint, as instructed on pages 14 to use the restraint either for left-hand or right-hand use.
- Page 19 KIT5 & KIT8 Figure 5 Figure 14 Figure 6 Indent Protrusion Figure 7 Figure 15 Figure 13...
- Page 20 • If the vehicle is involved in an accident when any restraints are deployed, remove them from service and replace immediately. If in doubt please contact BraunAbility.
-
Page 21: Warranty
BraunAbility products when used in conjunction with such jointly tested systems. For further details on specific applications please contact the Sales Office. In other situations, using BraunAbility products, for which BraunAbility has not participated in a joint test program, a limited BraunAbility warranty will apply. -
Page 22: Declaration Of Conformity
The Horseshoe Coat Road ISO 10542:2012 Martock, TA12 6EY, Somerset RESNA WC-4 2012 Section 18 R.107.06 2007/46/EC Phone: +44 1935 827740 E-mail: info@braunability.eu BraunAbility, Martock, 03 May 2019 www.braunability.eu Declares that the products / KIT5, KIT8 Rob Butcher Director of Engineering... - Page 23 Accredited by URS as testing laboratory in accordance with ISO/IEC 17025:2005 Quality system certified in accordance with ISO 9001:2008 Illustrations, descriptions and specifications in the user manual are based on current product information. BraunAbility UK Ltd reserves the right to make alterations without previous notice. © 2019 BraunAbility UK Ltd...
- Page 24 BraunAbility UK Ltd Unwin House Phone: +44 1935 827 740 The Horseshoe, Coat Road E-mail: info@braunability.eu Martock, TA12 6EY, Somerset, www.braunability.eu...
Need help?
Do you have a question about the KIT 8 and is the answer not in the manual?
Questions and answers