Page 1
HAND ACTUATED LOCKABLES User Manual Instructions for fitting and use...
Page 2
If you have any questions about your equipment, please contact us. Once again, thank you for placing your confidence in our products! Safe vehicle adaptation solutions For your safety BraunAbility products are designed and tested according to current directives and standards.
Page 3
HAL2, HAL3 Safety information Limitation of use Fit and use Fitting the Hand Actuated Lockable (HAL) to the seat leg Adjusting HAL setting to the rail Operating HAL After care Equipment storage and maintenance Warranty “Declaration of conformity” at the end of the manual.
Page 6
HAL2, HAL3 Fit and use Fitting the Hand Actuated Lockable (HAL) to the seat leg Note: Two removable seat fixtures are normally required for each seat. It is important that the seat legs are set to the identical rail width where the seat is to be fitted.
Page 7
Seat Leg 17mm wrench 7mm wrench Figure 1 Figure 2 Figure 3 WARNING In 3 stud version, the rear most fixing MUST NOT be used in isolation. If it is intended that the seat should face the rear, please contact BraunAbility.
Page 8
HAL2, HAL3 Fit and use Adjusting HAL setting to the rail HAL lockable comes with variable adjustable setting to accommodate different rail profiles and thicknesses. Each setting relates to a different thickness depth. Setting 1: Thinner Rail Setting 2: Standard Rail...
Page 10
HAL2, HAL3 Fit and use Operating HAL Before locating the seat into the rail, unlock HAL, by pressing the silver trigger Removing seat from rail (Fig 6) and then pull the handle fully back (Fig 7). To release the seat from the rail,...
BraunAbility have also participated in test programs with other manufacturers anchorage products and will support warranty on the BraunAbility products when used in conjunction with such jointly tested systems. For further details on specific applications please contact the Sales Office. In other situations, using BraunAbility products, for which BraunAbility has not participated in a joint test program, a limited BraunAbility warranty will apply.
Declaration of conformity Manufacturer / Conforms to following directives standards and regulations / BraunAbility UK Ltd. Unwin House 2001/85/EC Annexe VII Paragraphs 3.8.2.8 & 3.8.2.9 The Horseshoe Coat Road 76/115/EEC Martock, Somerset, TA12 6EY R.14.07 R.107.06 BS EN 1789:2007+A2:2014 Phone: +44 1935 827740 E-mail: sales.uk@braunability.eu...
Page 15
Illustrations, descriptions and specifications in the user manual are based on current product information. Illustrations, descriptions and specifications in the user manual are based on current product information. BraunAbility UK Ltd reserves the right to make alterations without previous notice. BraunAbility UK Ltd reserves the right to make alterations without previous notice.
Page 16
BraunAbility UK Ltd BraunAbility UK Ltd Unwin House Unwin House Phone: +44 1935 827 740 Phone: +44 1935 827 740 The Horseshoe, Coat Road The Horseshoe, Coat Road E-mail: info@braunability.eu E-mail: info@braunability.eu Martock, Somerset, TA12 6EY Martock, Somerset, TA12 6EY www.braunability.eu...