Getting Started; Installing Filters - Philips AP9966 User Manual

3 Getting started

Installing filters

Remove all packaging of the filters
before using the appliance. Unpack
them and place them into the
appliance described as follows:
Note
• There is one set of filters on
each side of the appliance.
Each side is equipped with
one pre-filter and one air
purification filter.
• Make sure that you place the
air purification filter in the
appliance first and then the
pre-filter.
• Make sure that the side with the
tag is pointing towards you.
1
Remove all packaging materials
of the air purification filters.
2
Pull the top part of the side
panel to remove it from the
appliance.
3
Press the two clips down and
pull the pre-filter towards you.
4
Put the unpacked air purification
filter back into the appliance.
EN 9