Language; Twindos - Miele WMR561WPS Operating Instructions Manual

Language 
The display can be set to appear in
one of several different languages.
The flag  after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The selected language will be stored in
memory.

TwinDos

You can set the type and amount of
detergent and also start a cleaning
programme for the TwinDos system.
Detergent/amount
The washing machine is pre-set as
standard for UltraPhase 1 and
UltraPhase 2 for hardness range II ().
The settings must be changed in the
electronics:
– for water hardness range I () and
water hardness range III ().
– when changing to a different
detergent or fabric conditioner. The
TwinDos containers (optional
accessories) are required for this.
Dosage amounts for UltraPhase 1 and
UltraPhase 2
UltraPhase 1
UltraPhase 2
 
48 ml 60 ml 72 ml
36 ml 45 ml 54 ml
Adjusting the dosage amount
 Select the
option and confirm this with the OK.
sensor.
 Select the compartment you want
using the  and  sensors and
confirm your selection with the
OK sensor.
Compartment 
Miele UltraPhase 1
Miele UltraColor
Miele WoolCare
 Touch the OK sensor.
Dosage - Compartment 
 Use the  and  sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.

Now enter the settings for UltraPhase 2.
 Confirm the message with the
OK sensor.
 Use the  and  sensors to adjust
the dosage amount for
compartment  and confirm this

value with the OK sensor.
The dosage amount has been adjusted.
Settings
Detergent type / amount

60 ml
Normal soiling


101