Diagnostics Screen - Simplex Trident Manual

d
iagnoStiCS
SCreen
16 — Operating Instructions
the temperature sensors are reading, the voltages of the three
phases, and check the operation of the unit's load steps by acti-
vating them individually.
Any load that you activate on the maintenance screen will be
dumped when you leave the screen.
The Factory Setup screen can be accessed from maintenance
mode, but it is intended for Simplex service representatives only
and is password protected.
From the mainte-
nance mode screen, you
can enter the Diagnos-
tics screen (Figure
which displays the status
of the load bank's pro-
grammable logic con-
troller. This screen can
be useful when working
with the Simplex Service
Department should a
problem arise with your
load bank.
11),
Figure 11 Diagnostics
screen
®