Lubrication System - Volvo TD420VE Operator's Manual

Maintenance

Lubrication system

Oil change intervals can vary from 40 to 500 hours, depending on oil grade and sulfur content of the fuel. Note
that oil change intervals must never exceed a period of 12 months.
If you want longer oil change intervals than given in the table below, the condition of the oil must be checked by
the oil manufacturers through regular oil testing.
Motor
T(A)D420-620VE
T(A)D520-721VE
T(A)D520-720GE
TAD721/722GE, aberto
ventilação do cárter
do motor
TAD721/722GE, fechado ACEA: E4
ventilação do cárter
do motor
TAD722VE
potência <200kW
potência >200kW
NOTE! Fully synthetic oil must be used for the TAD722VE engine. Mineral based oil, either fully or semi-synthet-
ic can be used in other engines, on condition that it complies with the quality requirements above.
If the 6 and 7 liter engines are equipped with a low-profile oil pan, the oil change intervals should be
changed.
VDS = Volvo Drain Specification
Global DHD = Global Diesel Heavy Duty
ACEA = Association des Constructeurs Européenne d'Automobiles
API = American Petroleum Institute
TBN = Total Base Number
22
Grau do óleo
VDS-3
VDS-2
ACEA: E7, E5, E3
API: CI-4, CH-4, CG-4
API: CI-4, CH-4
NOTA: Tem que ser utilizado óleo
totalmente sintético
ACEA: E4
Teor de enxofre no combustível, por peso
< 0,5 % 0,5 – 1,0 %
Intervalo de mudança de óleo,
conforme o que primeiro ocorrer
500 h / 12 meses 250 h / 12 meses
500 h / 12 meses 250 h / 12 meses
500 h / 12 meses 250 h / 12 meses
250 h / 12 meses 125 h / 12 meses
> 1,0 %
1)
125 h / 12 meses
125 h / 12 meses
125 h / 12 meses
60 h / 12 meses