Operating Procedures - Orion RKS400F-S Operation Manual

● Never operate switches with wet hands, and never touch electrical components. Improper
handling may result in electric shock.
● Never operate the product while the cabinet is open or removed. Touching the inside of the
product may result in injury or electric shock.
● Do not use water to clean this product, and do not allow water to spray or spill onto or in the
vicinity of this product. Water contact may result in fire or electric shock.
● If the product behaves abnormally, switch it off and then cut the power. Then contact your
dealer or product specialist. Continuing to run the product while operation is abnormal may
result in fire or electric shock.
● Always power this unit on its own, unshared power socket. Also do not splice other power
connections to the middle of the power cord. Do not use an extension cord. And do not use a
multi-outlet adapter. Failure to follow this warning can lead to fire or electric shock.
(RKS400F-S)
● Do not start or stop the unit by plugging in or unplugging the power cord. Doing so can lead
to an electric shock or shorts. (RKS400F-S)
● Do not loosen the priming water cap while the product is operating. Loosening the cap could
allow air to enter the pump, resulting breakdown due to running dry.
● Periodically check the power cord plug for dust and ensure the plug is fully inserted into its
power socket such that there is no gap between the plug face and power socket. Dust on the
power plug or failure to fully insert the power plug into its socket can result in fire or electric
shock. (RKS400F-S)

Operating Procedures

WARNING
WARNING
WARNING
CAUTION
CAUTION
9