Technical Specifications - APEX FORGE M6 User Manual

The wire bristles can easily penetrate light clothing and / or skin.
b) Allow brushes to run at operating speed for at least one minute before using
them. During this time no one is to stand in front or in line with the brush. Loose
bristles or wires will be discharged during the run-in time.
c) Direct the discharge of the spinning wire brush away from you. Small particles
and tiny wire fragments may be discharged at high velocity during the use of
these brushes and may become imbedded in your skin.

TECHNICAL SPECIFICATIONS

Mains voltage
Power input
No load speed
Collet Size
Protection class
WARNING
Always wear eye protection when using this tool. Failure to do that could result in
objects being thrown into your eyes and cause possible serious injury.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer
of this product. The use of attachments or accessories not recommended can result
in serious personal injury.
Applications
You may use this product for the purposes listed below:
●
Cutting
●
Sanding
●
Polishing and buffing
●
Engraving
●
Drilling
10,000 - 35,000 RPM
ClassⅡ double insulated
- 07 -
120V~ 60Hz
135W（1.0A）
1.6/2.3/3.2mm