Information About The Interface Module; Personnel Qualification - Lauda LRZ 914 Operation Manual

2.2

Information about the interface module

2.3

Personnel qualification

Specialized personnel
8 / 29
Always disconnect the constant temperature equipment from the power

supply before installing the interface module or connecting interfaces.
Always take the recommended safety measures against electrostatic

discharge before handling interface modules.
Avoid touching the circuit board with metallic tools.

Do not start up the constant temperature equipment before installation

of the interface module is complete.
Store any unused interface modules in their packaging in accordance

with the specified ambient conditions.
Use only suitable cables of sufficient length for cable connections.

Make sure that the protective screen on the cables and connec-

tors complies with EMC regulations. LAUDA recommends using pre-
assembled cables.
Always lay cables correctly so that they do not pose a tripping hazard.

Secure the laid cables and make sure that they cannot be damaged
during operation.
Check the condition of the cables and interfaces prior to each opera-

tion.
Immediately clean any soiled parts, in particular unused interfaces.

Make sure that the signals transmitted via the interface correspond to

the permitted operating parameters of the interface module.
Only specialized personnel are permitted to install interfaces modules. Spe-
cialized personnel are personnel whose education, knowledge, and experi-
ence qualify them to assess the function and risks associated with the device
and its use.
Interface module LRZ 914 / 915 V1