Table of Contents
Advertisement
10
Decommissioning
V1
WARNING!
Touching live parts
Electric shock
Disconnect the device from the power supply before
starting any installation work.
Always observe safety measures against electrostatic dis-
charge.
Decommission the interface module by removing it from the constant tem-
perature equipment:
1.
Observe the information in Ä Chapter 5.1 "Installing the interface
module" on page 12. Proceed in reverse order to remove.
2.
Always attach the LiBus connecting cable to the inside of the module
slot cover.
3.
Fit the cover to the vacant module slot to protect the constant
temperature equipment against the ingress of dirt.
4.
Protect the interface module against static charging before placing
it in storage. The storage location must meet the ambient conditions
specified in the technical data.
5.
If you intend to dispose of the module, please read the information in
Ä "Old device" on page 26 first.
Interface module LRZ 914 / 915
25 / 29
Advertisement
Table of Contents
