7
Operation
7.1
Menu structure
All operating units except the Master
Fig. 12: Contact module menu
V1
After the equipment is switched on, the new interface can be addressed
and configured from the constant temperature equipment menu. Different
functions can be selected for the inputs and outputs: Depending on the
interpretation of the input signal, different information is transmitted to the
signal output.
The menu only ever shows functions that are available for the
current constant temperature equipment.
The menu for configuring the interface is integrated in the main menu of the
relevant constant temperature equipment:
Menu Modules Switching contacts
Interface module LRZ 914 / 915
17 / 29