Advertisement
EDIT: To use this feature, press EDIT and then press the item you wish to edit, such as;
HOME Team HITS. You will notice a flashing cursor on the LCD display. Key in
the correct value on the numeric keypad and press ENTER.
HOME SCORE:
To increase the HOME score by one press the +1 key on the HOME SCORE
keypad. To decrease the HOME score by one press the -1 key on the HOME
SCORE keypad.
GUEST SCORE:
To increase the GUEST score by one press the +1 key on the GUEST SCORE
keypad. To decrease the GUEST score by one press the -1 key on the GUEST
SCORE keypad.
GAME KEYPAD:
To increase INNING by one press the INNING key
To increase BALL by one press the BALL key
To increase STRIKE by one press the STRIKE key
To increase OUT by one press the OUT key
To clear all balls and strikes for the next batter press the NEW BATTER key
If at the end of a game the scoreboard is to be used to score another game press
and hold the RESET key for three seconds. All scoring information on both the
controller's LCD and the scoreboard will be cleared, while all option settings will be
saved.
After the last game simply turn the controller's POWER switch OFF. All scoring
information and option settings will be saved and may be retrieved when the controller
is turned back on by pressing ENTER.
Shortly after the controller is turned off the, PERIOD/INNING digit on the
scoreboard will begin to flash and will continue to do so until power to the scoreboard
has been shut off at the scoreboard's power disconnect switch or circuit breaker.
After each use the controller and all accessories should be stored in a secure, dry
location.
NOTE: AFTER EACH USE POWER TO THE SCOREBOARD MUST BE TURNED
OFF AT THE SCOREBOARD'S POWER DISCONNECT SWITCH OR CIRCUIT
BREAKER.
FAILURE TO DO SO WILL RESULT IN UNNECESSARY POWER
CONSUMPTION, SHORTEN THE LIFE OF THE DISPLAYS AND OTHER
ELECTRONIC COMPONENTS.
NOTICE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at their expense.
ADDITIONAL INFORMATION
Advertisement
