Page 2
CONTROLLER DEFINITIONS Before continuing, take a few moments and familiarize yourself with the following terms as they apply to the controller. They are referenced frequently throughout this manual. 1. POWER Switch: The POWER switch is used to turn the controller ON and OFF. 2.
COMMUNICATION CABLES Connecting a Hard Wired Cable Using the supplied 20-ft. DIN cable, connect one end to either of the DIN sockets on back of the controller and the other end to the junction box receptacle. Connect the AC Adapter to the power jack on the back of the controller and into a standard 120V power source.
GETTING STARTED Begin by making sure the Game Inserts that came with your scoreboard are in the proper location on the controller, as in the image below. A Note about the LCD Display: The LCD display provides the scorer with any information that the scoreboard will display.
Page 5
GAMEPLAY OVERVIEW: Scoring a game with the 3328LED scoreboard and the LCD controller begins with the first batter’s number being entered if AT BAT scoring is enabled. Press the NEW BAT/AT BAT key on the appropriate team’s keypad and notice that the LCD display has a flashing cursor.
EDIT: To use this feature, press EDIT and then press the item you wish to edit, such as; HOME Team HITS. You will notice a flashing cursor on the LCD display. Key in the correct value on the numeric keypad and press ENTER. HOME SCORE: To increase the HOME score by one press the +1 key on the HOME SCORE keypad.