Related Manuals for HOTO P12
Summary of Contents for HOTO P12
- Page 1 User Manual for HOTO Cordless Screwdriver Scan to follow us on WeChat Get 1Y+ warranty and new follower benefits...
-
Page 3: Product Overview
01 Product Overview Read this manual carefully before use, and retain it for future reference. Thank you for using HOTO Cordless Screwdriver. Bit Holder LED Light Direction Knob Start Bu on USB Charging Port Charging Indicator... -
Page 4: How To Use
02 How to Use LED Light To illuminate the object you are working on, press and hold the start bu on. Then the LED light will be on. Push the knob upward Direction Knob Turn or tighten screws:Push the knob upward, Turn or tighten screws press and hold the start bu on, screw in or tighten the screw. -
Page 5: General Power Tool Safety Warnings
03 General Power Tool Safety Warnings Warning! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool”... - Page 6 moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
- Page 7 Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 8 Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Keep handles and grasping surfaces dry, clean and free from oil and grease.
- Page 9 Follow all charging instructions and do not charge the ba ery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the ba ery and increase the risk of fire. Service Have your power tool serviced by a qualified repair person using only identical replacement parts.
-
Page 10: Additional Safety Information
Additional safety information Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Always wait until the power tool has come to a complete stop before placing it down. The application tool can jam and cause you to lose control of the power tool. -
Page 11: Troubleshooting
Protect the ba ery against heat, e.g. against continuous intense sunlight, fire, dirt, water and moisture. There is a risk of explosion and short-circuiting. Troubleshooting Issue Possible Causes Solution Screwdriver doesn't work Lithium ba ery is depleted Charging Lithium ba ery is depleted Charging Screwdriver stops rotating during use Bit size does not match... -
Page 12: Specifications
Standard: SL5 Ba ery Type: Lithium-ion ba ery Torx: T25 Rated Capacity: 2000 mAh No Load Rotational Speed: 200 rpm Charging Time: 120–180 min Manufactured by: Shanghai HOTO Technology Co., Ltd. Address: Building 45, No.50 Moganshan Road, Putuo District Shanghai,China...
Need help?
Do you have a question about the P12 and is the answer not in the manual?
Questions and answers