User Instructions - Bush AG66DSS Operating Instructions Manual

User Instructions

Using the hob
Ignition of the burners
To determine which knob controls which
burner, check the position symbol above the
knob.
1. Manual Ignition of the Gas Burners
If your appliance is not equipped with any
ignition aid or in case there is a failure in the
electricity network, follow the procedures
listed below.
For Hob Burners: To ignite one of the burners,
press and turn its knob counter-clockwise so
that the knob is in max. position, approach a
match, taper or another manual aid to its
upper circumference. Move the ignition
source away as soon as you see a stable
flame.
For Oven Burners: To ignite the oven burner,
press and turn the oven control knob
counter-clockwise so that the knob is in max.
position, approach a match, taper or another
manual aid to the ignition hole that is located
on the front left corner of the burner. Move
the ignition source away as soon as you see a
stable flame.
For Grill Burners: To ignite the grill burner,
turn the grill valve in the clockwise position
until the marker on the knob points at the
grill sign. Then, keep the knob pressed and
approach a match, taper or another manual
aid to the holes that are situated on the
burner. Move the ignition source away as
soon as you see a stable flame.
2. Ignition by Spark Button
Press the valve of the burner you want to
operate and turn the valve in the counter-
clockwise direction so that the knob is in
max. position and with your other hand,
press the ignition button at the same time.
Press the ignition button immediately,
because if you wait, a build up of gas may
cause the flame to spread. Continue pressing
the ignition button until you see a stable
flame on the burner.
8
Customer Helpline 0345 257 7271
IMPORTANT - Flame safety device:
Hob Burners
Hobs equipped with flame failure device
provide security in case of accidentally
extinguished flame. If such a case occurs, the
device will block the burners gas channels and
will avoid any accumulation of unburned gas.
Wait 90 seconds before re-igniting an
extinguished gas burner
Oven / Grill Burners
Regardless of the model of your appliance, all
oven burners are equipped with a gas safety
device. For this reason, during ignition, keep
the oven knob pressed until you see stable
flames. If the flames are cut out after you
release the knob, repeat the procedure again. If
the oven burner does not ignite after you keep
the burner knob pressed for 30 seconds, open
the oven door and do not attempt re-ignition
for at least 90 seconds. When oven flames go
out accidentally, repeat the same procedure
.
.