Base Dosage; Dispenser Content For I-Dos Iiô - Siemens WMH6Y899DN Instruction Manual And Installation Instructions

Base dosage

The basic dosages are:
For detergents – based on the
■
manufacturer's recommendation for
average soiling and the respective
water hardness.
F or fabric softeners – based on the
■
manufacturer's recommendation for
a medium level of softness.
Refer to the packaging label on your
detergent/fabric softener or ask the
manufacturer directly for this
information.
To find out the hardness of your water
supply, use a test strip or check with
your water supplier.
My water hardness:
Below is an example of detergent
dosages on a packaging label:
Degree of
soiling →
Water
hardness ↓
soft/medium 55 ml 75 ml 120
hard/very hard 75 ml 95 ml 150
The default setting for the basic dosage
is set specifically according to the area
in which you live (e.g. 75 ml for
detergent and 36 ml for fabric softener).
160
ml ml
180
ml ml
Intelligent dosing system
Set the basic detergent dosage
according to the detergent's packaging
label. Take your water hardness into
consideration when doing so.
Select the basic fabric softener dosage
according to how soft you would like
your laundry to be.
Changing one basic dosage affects all
three dosage quantities in the same
way.
Notes
Reduce the basic dosage if using a
■
very concentrated detergent.
If large amounts of foam are
■
repeatedly created during washing,
please check your basic dosage and
dosage quantity settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage quantity settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
Appliance settings ~ Page 56
Dispenser content for
i-Dos iIô
Instead of fabric softener, a second
liquid detergent can be used in the i-
Dos iIô dispenser.
Notes
When switching the i-Dos iIô
■
dispenser content from fabric
softener to detergent, the basic
dosage for detergent is set to factory
settings for this dispenser and the
dosage for this detergent is set to
Off for all programmes in which
intelligent dosing can be used. Then
use the i-Dos button in the display
panel to select the detergent dosage
(low, medium or high).
en
49