Table of Contents
Advertisement
EA Technology
CableData Collector Operating Manual
1365/L/01/1
The confirmation shown in Figure 61 will be displayed, warning that all of the customisations
will be lost. Clicking the Yes button will continue with the removal. Clicking the No button will
return to the Settings screen.
Figure 61 - Confirmation of removing user customisations
After confirming deletion, once this has been carried out the message shown in Figure 62
will be displayed.
Figure 62 - Confirmation of removal
10.7
Updating Software
If version 1.x of the CableData Collector software is already installed, this must be
uninstalled before installing the updated version 2.x.x software. From version 2.x.x onwards,
any updates will automatically upgrade the installed software, meaning the old software will
not need to be removed beforehand.
Uninstalling the software will cause the user customisations to be lost, for example custom
cable voltages, and cable types. After uninstalling the software, navigate to the installer
application and follow the previous instructions on installing the software in section 10.1.After
installation is completed, the first time that the software is ran, the following warning
message might appear:
Figure 63 - Warning when updating software
Page 42 of 54
Advertisement
Table of Contents
