Table of Contents
Advertisement
EA Technology
CableData Collector Operating Manual
1365/L/01/1
10.4.15
Progress Indication
When the data capture process is started, an additional progress bar will appear beneath the
top visible bar. The top bar indicates the progress through the different data capture stages
as shown in the previous section. The lower status bar indicates the progress though the
current stage. To the right of the lower progress bar is a text field indicating the current data
capture stage.
In Figure 46, the data capture process has just started and the second bar is visible.
Figure 46 - Dual progress bars at start of data capture
In Figure 47, the data capture is part way through stage 1. As this is the raw data, this stage
will take approximately 15 seconds.
Figure 47 - Bottom progress bar showing current operation progress
Figure 48 shows the software in the unfiltered waveform capture stage. As this is a
waveform stage, the length of time taken will depend on the PD activity present on the cable.
Figure 48- Top progress bar showing data capture sequence progress, bottom progress bar
showing current operation progress
Once the data capture is completed, both bars should be fully green as shown in Figure 49.
Figure 49 - Progress bars at capture completion
Page 36 of 54
Advertisement
Table of Contents
