EA Technology CableData CDC2 Operating Manual page 27

EA Technology CableData Collector Operating Manual 1365/L/01/1
Figure 22 - CableData Acquisition Software Start-up
If during the loading procedures, it has not been possible to read the asset data, the warning
shown in Figure 23 will be displayed. If this warning is displayed, first try unplugging the unit
and closing the software. Then re-connect the unit and start the software again. If the
warning message persists, please contact product support.
It is still possible to capture data without the asset data, however this is not advised as the
results of the analysis may have reduced accuracy.
Figure 23 - Error whilst reading asset data
Page 23 of 54