Table of Contents
Advertisement
EA Technology
10
CableData Collector Software
10.1
Software Installation
Before starting the installation process, any other older version of the CableData Collector
software should be uninstalled including the accompanying Virtual COM Port driver.
The CableData Collector software requires Microsoft's .Net 3.5 framework to be installed, for
which a separate installer included with the setup files. If you are unsure, whether you have
this installed then it is advisable to run and install this before starting with the installation of
the CableData Collector.
To start the installation, locate the install files supplied. Run the exe file to start the
installation process. Windows administrator privileges are required to install the CableData
Collector software. The installer applications are shown in Figure 6.
Figure 6 - Setup Files
Running the CableDataCollector_Setup_xxx file will ask for confirmation before installation
proceeds. The confirmation screen is shown in Figure 7. To start the installation, click Yes.
Figure 7 - Installer Confirmation
The CableData Collector Setup Wizard runs, and has several installation steps. As part of
the installation process, a Virtual COM Port driver is installed. This is necessary to
communicate with the CableData Collector.
CableData Collector Operating Manual
Page 14 of 54
1365/L/01/1
Advertisement
Table of Contents
