Calling By Voice Recognition - Toyota Camry 2009 Quick Reference Manual

1 Press the voice command button on
step
the steering wheel and wait for the
beep. After the beep say, "Dial by
number."
3
Press the voice command button
step
on the steering wheel and wait
for the beep. After the beep say,
"Dial." If the incorrect number has
been inputted or if you wish not to
complete the call, touch
5
step
To end the call touch
Quick Tip - A noisy environment may prevent the voice recognition system from understanding your
commands. It is recommended that you reduce background noise (including passenger conversation
and wind noise) prior to using the Voice Recognition system.
Quick Tip - Speak clearly and at a moderate speed after the beep sound has played.

CALLING BY VOICE RECOGNITION

step
step
.
Some Bluetooth equipped cell phones may or may not
show battery or signal strength on the display.
Touch the Mute icon to mute the conversation.
When muted the yellow indicator above the icon will
appear. Touch the Mute icon to unmute the active call.
Touch the Transfer Call icon to transfer the active call
to the paired cell phone for a private conversation.
.
Press the voice command button
2
on the steering wheel and wait for
the beep. After the beep say, "Eight,
zero, zero, fi ve, fi ve, fi ve, one,
two, one, two." Say the numbers
individually and at a moderate
speed.
4
The call is active after
changes to .
14