Calling By Voice Recognition; Dial By Number - Toyota 2011 4Runner NAVIGATION SYSTEM Quick Reference Manual

CALLING BY VOICE RECOGNITION

DIAL BY NUMBER

1
step
Press
After the beep say, "Phone."
Quick Tip - If you know your next command,
you can press
prompt. Speak your command after the beep.
3
step
After the beep say the phone
number digits individually, without
pausing (e.g. "Three, one, zero,
four...").
5
step
Call is active when
is indicated. To end call, press
on the steering wheel.
13
on the steering wheel.
at any time to interrupt the
on the screen or
2
step
After the beep say, "Dial by
Number."
4
step
After the beep, say "Dial" or
press
wheel.
cell phones may or may not show battery or signal
strength on the display.
Quick Tip - A noisy environment may prevent
the voice recognition system from understanding
your commands. It is recommended that you
reduce background noise (including passenger
conversation and wind noise) prior to using the
Voice Recognition system.
on the steering
Some Bluetooth ® equipped