Advertisement
Installation Diagrams
Installation:
1. Use a coaxial cable to connect the
Antenna to the "Antenna In" port on the
Pre
as shown in the image.
2. A) Use a separate coaxial cable
to connect the "Out" port on the
to the "Antenna IN/DC
Power Out" port on the splitter.
B) Optional Location for the Power
Inserter. If used here then a regular non
power passing splitter will be OK.
3. Use separate coaxial cables to connect
the "To TV" ports on the splitter to 3 TVs
in your home.
4. Use a separate coaxial cable to
connect the "RF Out/DC Power IN" port
on the splitter to the "To Amp" port on
the Power Inserter.
5. Use a separate coaxial cable to
connect the "To TV" port on the power
inserter to the "RF IN" port on the
distribution
6. Two options to power the distribution
(Option 1 - When Power source is close
to distribution
Use a separate
coaxial cable to connect the "Power
IN" port on the distribution
the DC power supply. Plug in the DC
power supply into power outlet.
(Option 2 - When NO power source is
close to Distribution
Use a
separate coaxial cable to connect the
"Power IN/Out" port on the distribution
to the "To Amp" port on the
power inserter. Use a separate coaxial
cable to connect the "To TV" port on
the power inserter to the "ANT IN" port
on the TV. Use a separate coaxial cable
to connect the DC power supply to the
power inserter. Plug in the DC power
supply into power outlet.
7. Use separate coaxial cables to connect
the "To TV" ports on the distribution
to the TVs in your home.
ChannelMaster.com
| 877.746.7261
7 TVs
1
Cable Coaxial >
CM-3706
OUTSIDE
INSIDE
3
BACK OF TV
ANT IN
4-Way RF Splitter
Power Passing >
Power Inserter >
CM-7777XPI
6
Distribution
to
Amplifier >
CM-3414
DC Power >
Supply
Power Outlet
DC Power >
Supply
© 2021 Channel Master L.L.C. Channel Master is a registered trademark. Specifications subject to change. All rights reserved. © 2021 Channel Master. Channel Master es una marca registrada. Especificaciones sujetas a
cambio. Todos los derechos reservados. © Channel Master, 2021. Channel Master est une marque déposée. Les caractéristiques peuvent être modifiées sans préavis. Tous droits réservés. Pub CM7778HD.IS.202101
with Amp
Mast >
CM-1805
< Balun
< Preamplifier
PREAMP
CM-7777/CM-7778/CM-7777HD
CM-7777V3/CM-7778V3/CM7778HD
OUT
IN
Power Inserter
CM-7777XPI
v
2a
OUT
OUT
IN
OUT
OUT
4
(Option 1)
5
POWER IN
IN
POWER
/OUT
OUT
OUT
OUT
IN
TO
TO
AMP
TV
TO
POWER
Power Inserter >
CM-7777XPI
(Option 2)
300 to 75 Ohm Matching Transformer
CM-94444
< Cable Coaxial
< Note: Length depends on installation
2b
BACK OF TV
ANT IN
< DC Power
Supply
Power Outlet
BACK OF TV
ANT IN
BACK OF TV
ANT IN
BACK OF TV
ANT IN
7
BACK OF TV
ANT IN
BACK OF TV
ANT IN
Advertisement
