Related Manuals for Channel Master CM3000HD
Summary of Contents for Channel Master CM3000HD
- Page 1 SMAR T enna ™ USER GUIDE CM3000HD...
-
Page 2: Product Overview
TV SIGNAL RECEPTION CM-3000HD Product Overview The Channel Master CM3000HD is a unique new digital HDTV antenna designed for indoor or outdoor installations. It is engineered to be easy to install in any location to meet your needs. Every antenna is made of the finest components to exceed consumer expectations. -
Page 3: Product Features
Product Features • Designed for both indoor and outdoor installations • Excellent for HDTV reception • Easy installation indoors or outdoors • Omni directional performance • UV stabilized plastics and weather resistant design • Can be painted to match the décor of your home Package Contents and Accessories 1. -
Page 4: Warning And Safety Information
WATCH FOR WIRES! You can be KILLED if this antenna comes near electric power lines! READ INSTRUCTIONS WARNING AND SAFETY INFORMATION Please read this user's manual before operating this product. The information contained in this document is subject to change without notice. Features or specifications may be different depending on the type of product model purchased. - Page 5 Follow These Procedures for the Safest Installation 1. Perform as much antenna assembly on the ground as possible. 2. Watch out for overhead power lines. Check the distance to the power lines before you start installing. WE RECOMMEND YOU STAY A MINIMUM OF TWICE THE MAXIMUM LENGTH OF THE ANTENNA ASSEMBLY AWAY FROM ALL POWER LINES.
- Page 6 1. Attach the plastic feet (Fig. 1) to the antenna unit using the four (10 mm) screws provided. Screws Tornillos Figure 1 2. Place the CM3000HD on a counter near the TV set. 3. Connect the F Figure 2 connector from one end of a coaxial jumper...
- Page 7 Outdoor Use, Wall Mounting: 1. Assemble the metal mount (Fig. a) using the two (10 mm) round head screws provided. Figure a 2. Attach the metal mount (Fig. 3) to the antenna unit using the two (15 mm) screws provided. Figure 3...
- Page 8 (Fig. 4). Figure 4 5. Run coaxial cable between the TV set location and the CM3000HD antenna and attach F connectors to both ends of the cable. 6. Attach the connector on the antenna end of the cable to the CM3000HD.
- Page 9 Outdoor Use, Mast Mounting: 1. Assemble the metal mount (Fig. a) using the two (10 mm) round head screws provided. Figure a 2. Attach the metal mount to the antenna unit using the two 0.6” (15 mm) screws provided (Fig. 6). Figure 6 3.
- Page 10 (Fig. 7). Figure 7 5. Run coaxial cable between the TV set location and the CM3000HD antenna and attach F connectors to both ends of the cable. 6. Attach the connector on the antenna end of the cable to the CM3000HD.
- Page 11 Gain: VHF/UHF 5 - 8 dB Min • Impedance: 75Ω Customizing Your SMARTenna The Channel Master SMARTenna can be painted to match your home décor. Metallic or conductive paint cannot be used to paint the antenna as it may cause signal degradation. Channel Master cannot guarantee the antenna performance if these types of paints are used.