Table of Contents
Advertisement
SECURE DOOR PANEL
5
6
7
28
Open the door and loosen the lower
bracket screw. Adjust the bracket until it
rests against the door panel. Re-tighten
the screw and fit an additional screw to
secure to panel.
Install kit E
Fit the lower panel using the
same process.
Recheck all gaps and any clashing.
FIT TRIMS AND GRILLE
1
2
3
4
Fit the top cover using two screws.
Ensure flat side faces out from the
panel. Repeat for the lower door.
Locate the shorter door trim to the
hinge-side of the product, and slide
down to clip in place. If a gap is present,
remove and readjust the side brackets.
Repeat for lower door.
Locate the longer door trim to the non-
hinge-side of the product and slide
down to clip in place. If a gap is present,
remove and readjust the side brackets.
Ensure trim does not protrude above
the top cover. Repeat for lower door.
Fit the top trim on the lower door.
Advertisement
Table of Contents
