Table of Contents
Advertisement
JOIN PRODUCTS (MULTIPLE PRODUCT INSTALLS ONLY)
5
Repeat process for additional products.
DEPTH GAUGES & SPACER
1
2
3
INSERT HINGE LIMITING PIN (OPTIONAL)
1
Clip both hinge spacers onto
the product.
Ensure spacer
is fitted to the top of
A
the product and spacer
is fitted to the
B
bottom of the product, for right-hand
hinge installations and vice versa for
left-hand hinge installations.
Install kit B
Using the supplied crosshead screws,
fit the depth gauges at the the top &
bottom of the door as shown.
Install kits B & C
Multiple product installs:
Fit either the depth gauges or spacers
at the top and bottom of the product
based on your installation as shown.
To limit the door opening to 90⁰, place
the hinge limiting pin into the lower
hinges on both doors.
Install kit H
21
Advertisement
Table of Contents
