Inter-m RMX-1426 Operation Manual page 11

RMX-1426
8. Headphone Output Jack
This is a stereo output on balanced 1/4" phone jack, for monitoring the signal of
the master output buss. When the PFL switch is activated on an input channel, the
signal present at this jack is the input signal of the associated input channel.
9. Output Buss Switches
These switches switch on the output to the associated output buss. Separate
switches are provided for the main Stereo buss, PGM 1/2 and PGM 3/4 busses.
10. Master Output Fader
This fader controls the output level to the selected output busses.
11. Meter Select Switch
The Output Meters (12) are dual-function LED meters whose source is selected
with this switch.
When the Meter Select Switch is set to OFF, the meters display the Stereo L/R
output level.
When the Meter Select Switch is set to ON, the meters display the headphone or
monitor output level.
12. Output Level Meters
These 10-segment LED meters display the output level as selected by the Meter
Select Switch (11).
13. PFL Indicator LED
This LED lights when any of the Input Channel PFL switches are activated.
14. Phantom Power Switch and Indicator
Pressing this switch activates the +48VDC phantom power supply to all Input
Channels, for use with condenser mics requiring external power. When Phantom
Power is active, the LED indicator lights.
NOTE: It is safe to connect most modern dynamic microphones or line level
devices to the channel inputs when phantom power is activated. However, some
older ribbon microphones may be damaged by phantom power, and certain
unbalanced line level devices may malfunction or produce an audible hum
when phantom power is active.
15. Power Switch
This switch is used to switch the unit on and off. When the unit is on, the adjacent
Power Indicator LED is lit.
Multichannel Audio Mixer
11