Rear Panel Controls - Inter-m PA-9336 Operating Manual

REAR PANEL CONTROLS

1
OUTPUT
B
COM 31V(4Ω) 70V(21Ω)
~ AC INPUT
230V 50Hz, 380W
FUSE : T6.3AL/250V
5 4
1. SPEAKER OUTPUT TERMINALS
These terminals are for connection of speaker lines to deliver power output to speakers.
Impedance (voltages) of 4Ω, 8Ω, 70V and 100V are provided for convenience. In any case,
use the speakers whose combined impedance is equal to or higher than the rated output
impedance of amplifier.
• USA/CANADA & Associated Version
Impedance
Output Voltage
2. INPUT JACKS
These input jacks and terminals are for the balanced input signal. You can connect amplifiers
in parallel by using XLR jack.
3. LEVEL ADJUST CONTROL
This control is for adjusting the level of amplifier from –12dB to 0dB with the reference input
sensitivity of 0dB (1V). Rotating the control clockwise increases the level and counter-
clockwise decreases the level.
4. FUSE HOLDERS
These fuse holders contain AC. Replace them with the same type fuse when they are blown
out. If they continuously blow, stop replacing fuses and refer servicing to qualified personnel.
3
A
100V(41Ω)
BALANCED
INPUT
LINK
1V/10KΩ
HPF INPUT(ADJ)
ON OFF
-12dB 0dB
6 2
4Ω 8Ω 13.6Ω
38V 53V 70V
MODEL NO;PA-9336
PUBLIC ADDRESS
POWER AMPLIFIER
OUTPUT POWER:360W
S/N
MADE IN KOREA
GROUND
LIFT
+
DC INPUT
FLOAT FRAME 24V
7 8
• EC & Associated Version
Impedance
Output Voltage
9
4Ω 13.6Ω 27.8Ω
38V 70V 100V
4 4