Rear Panel Controls - Inter-m PP-9213 Operation Manual

PP-9213

Rear Panel Controls

1. Master Output
This is a balanced XLR output jack for connecting to the input of a power amp.
2. Sub Outputs 1-2
These are unbalanced 1/4" phone jack outputs for connecting to the input of a
power amp or other audio input.
3. Priority Inputs 1-2
These are line level inputs on unbalanced 1/4" phone jacks. When signal is present
at these inputs, all other inputs are muted. The level for these inputs is controlled
by the front-panel Priority Level control (9).
4. Aux Inputs 1-2
These are line level inputs on unbalanced 1/4" phone jacks. Their level is
controlled by the front-panel Aux Level controls (5).
5. Mic Inputs 1-9
These are mic-level inputs on balanced three-pin XLR connectors. Their level is
controlled by the front-panel Trim controls (1). Phantom power is supplied to these
inputs with the rear-panel Phantom Power switch (13).
6. AC Connector and Fuse Holder
Connect the supplied standard AC input cable to this input. The fuse holder
below the input contains the AC overload protection fuse. If the fuse has blown
out, replace it with a fuse of the same type and rating. If the fuse continues to
blow, refer servicing to a qualified service technician.
7. Rec Output
This is an unbalanced line-level output on 1/4" phone jack, for connection to an
external recording device.
Preamplifier
9