Error Displays - Clarion FZ709E Owner's Manual

7. ERROR DISPLAYS

Error Display
ERROR 2
ERROR 3
( USB mode )
ERROR 3
( iPod mode )
CUR ERR
HUB ERR
Error Display
FAILED
∗ If an error display other than the ones described above appears, press the reset button. If the problem persists,
turn off the power and consult your nearest service dealers.
42
FZ709E
Cause
The files are not proper MP3/WMA/
AAC format.
The MP3/WMA/AAC files are
improperly encoded.
The iPod contains no audio files.
Over current detection.
Do not support the HUB devices.
Cause
No Bluetooth device is found within
®
range.
The device pairing information might
have been lost.
Device or unit is not in pairing mode
or wrong pass key is entered.
A2DP device is not connected.
Measure
Use only properly encoded MP3/
WMA/AAC files.
Use only properly encoded MP3/
WMA/AAC files.
Insert an iPod containing audio
files.
D i s c o n n e c t t h e d e v i c e s a n d
reconnect. If the devices are still
not recognized, try replacing with a
different devices.
Do not use the HUB devices.
Measure
Please turn on the Bluetooth
and place the device within range of
reception.
Please manually pair and reconnect
the device.
Please make sure both the unit and
device is in pairing mode and enter
the correct pass key.
Please manually pair and connect the
A2DP device.
device
®