Resetting The 420; Telephone Operation; New Call/Message Waiting Indicator; Voice Mail - SBC -420 User Manual

PROGRAMMING OPTIONS

RESETTING THE 420

The 420 can be reset to all factory default settings. The EXTENSION ID NUMBER is reset to 22.
The factory defaults are as follows:
LANGUAGE: ENGLISH
TIME: 01:01 AM
DATE: 01/01
DAY: SUNDAY
EXTENSION ID: 22
ALL RINGERS: ON
L1-L4 RINGERS: ON
MSGW LIGHT: Off, L1-L4
DELAY RING:

OFF

LINE USAGE: 1-4 ON
PRIME LINE: L1
LINE GROUP: L04
AUTO MUTE: ON
TONE/PULSE: TONE
FLASH TIME: .6 seconds
HOLD REMINDER: ON
In addition, all AREA CODES, all CALLER ID RECORDS and all DIRECTORY entries will be deleted.
NOTE:
See page 44, Programming Tree, for additional Reset information.
1 .
While in the PROGRAM mode, press the
RESET ALL
: select
: enter
2 .
Press the button to enter.
RESET ALL
ERASE: reset all
3 .
Press ERASE to RESET.
Reset!
button until the following screen appears:
20

TELEPHONE OPERATION

NEW CALL/MESSAGE WAITING INDICATOR

OFF – There are no Voice Mail messages or new Caller ID records.
ON SOLID – You have new CALLER ID records.
FLASHING - You have new Voice Mail.

VOICE MAIL

If you subscribe to telephone company voice mail, the 420 supports the feature with Visual
Message Indication (VMI). When new voice mail is received, the MESSAGE WAITING/NEW CALL
indicator will flash and the display will indicate which line has received the new voice mail.
When voice mail is reviewed and deleted, the light should automatically turn off.
See the IDLE MODE display in the DISPLAY diagram on page 6.
TURNING THE MESSAGE WAITING INDICATOR OFF
The light and display indication can be turned OFF manually in the PROGRAM MODE.
1 .
While in the PROGRAM mode, press the
button until the following screen
appears:
MSGW LIGHT
: select
: enter
2 .
Press the button to enter.
L1 MSGW LIGHT
: select
: enter
3 .
Use the buttons to select the desired
line.
4 .
Press the button to enter.
LI MSGW LIGHT
=Off
SAVE?
5 .
Use the buttons to change the
setting.
LI MSGW ON/OFF
=Off
: select
SAVE?
5 .
Press SAVE to accept the setting.
LI MSGW LIGHT
=Off
Programmed!
6 .
Repeat for the other lines.
OR
1.
While in the IDLE mode, press ERASE.
The LCD will display:
ALL MSGW LIGHT
ERASE: clear?
2.
Press ERASE again to turn the indicator
off.
ALL MSGW LIGHT
Cleared!
21