Hydraulic Outfits; Condensates Recovery - Internal Tray; Hydraulic Components Characteristics; Technical Data On Circulating Water - EUREVIA rZ cPIAEC 6 Installation Manual

4.2

Hydraulic outfits

There are various models of pre-assembled hydraulic kits connected to the cPIA
The outfits are ½'' female for the cPIA
®
equipped with Staubli connectors which are ¾'' female.
Condensates recovery – Internal tray
4.3
- The inclined tray has a 13,5 mm outside diameter
- Connecting hose: 12/14 evacuation PVC tube. There must be a constant inclination of at least 2%
4.4

Hydraulic components characteristics

4.4.1

Technical data on circulating water

- Water quality: according to the VDI2035 rule
- Maximum glycol content: 30%
- Minimum temperature: 5°C
- Maximum temperature: 70°C
- Maximum operating pressure : 10bar PN16
4.4.2

4-way valve (3-way + by-pass)

- Valve material: nickel-plated cast brass
- Authority (kvs): 1.6 for the DN10 panoplies and 2.5 for the DN10/15 ones
- A-AB leakage flow: 0.05% of the kvs
- Stroke of the valve: 2.9mm
- Not-powered position: normally closed
4.4.3

Thermal electrical motor

- Type: thermal motor with switching output (2 points)
- Compatible regulation: all or nothing
- Power supply: 230 V ~ +/- 15%, 50-60 Hz
- Power consumption in service: 2.5 W
- Absorbed power at start-up: 36 W
- Inrush current: 150 mA
- Spring tension: 125 N
EC
6 and ¾'' female for the cPIA
Exemples of outfits
EUREVIA - ZI Athélia 5 – 369 avenue des Grenadiers - 13600 La Ciotat -
FRANCE Phone : +33 (0)4 42 70 70 30
www.eurevia.com
EC
8 with an exception for the sets
drain.
–
info@eurevia.com
EC
plants.
8