INTELLINET 500012 NAS Quick Installation 1. Packing Contents • One Network attached system with the Main Board and FAN. • One RJ45 Cable. • One Parallel ATA IDE Cable for Hard Disk Only • One Power Code for Hard Disk Only •...
Before you start Everything you need to boot this system is included in this Quick Installation Guide. For more information, a complete Online User’s Manual can be found in the Bonus Pack CD Disc. 3.System Installation. 3.1. HD tray installation guide Step 1: Draw out the HDD tray from the system.
Page 3
Step 4: Assembled HDD tray Step 5: Insert IDE cable into HDD. Step 6: Insert power cable into HDD. Step 7: Install assembled HDD tray into system. Step 8: Screw HDD tray on the system. Step 9: Cover the system with top chassis.
3.2. System outlook and LED Color Power Blue Green Green HDD/F Green Status LED Activity Power On Power Off Flashing Transfer/Receive Data Flashing Read/Write Data HDD Full HDD have free space...
4 Software installation Step 01: Power on the system. Step 02: Insert Utility CD into CD-ROM Step 03: Open your Internet browser and key in the address http://192.168.0.1. You will see the below picture. (Notice: Set the IP of client system as the same domain) Step 04: Press button “Browser”...
Page 7
Step 08: Please choose the suitable profile. (Default is Conference Profile) Step 09: Please install the client engine software from the CD. (Path is x:\application) Step 10: Click “Administration Console” to operate Step 11: Click the “Server Web Management” and key in the default username and password”, then you can access the system setup.
Page 8
• Type of PC you are using; • Operating system you are using For more information about INTELLINET products, please visit the INTELLINET Web Site: www.intellinet-network.com ATTENTION!! The Software installation as described below, may be slightly different from the installation on your computer.