Setting to Default
For returning all settings except video out and communication system to factory default.
The following items will not return to default setting.
0 Video output mode
0 Camera ID
0 RS-485 ID
0 RS-485 Baud.
RS-485, DAY/NIGHT REMOTE Connection
Connect according to the diagram below to control via RS-485 or to remotely switch between Day and
Night.
And set "Day/Night" in the Menu to "Remote" to remotely switch between Day and Night.
Short terminal 1 and 2 : Night mode (night time)
Open terminal 1 and 2 : Day mode (day time)
Removes the IR cut filter and displays a black and white image at the same time.
Removes the IR cut filter and displays a color image at the same time.
DAY/NIGHT Switch
Controlling End
Terminal Block on the Back of SSC-9700
Control via RS-485
- + GND
1
2
- + GND
21