Eizo carina SSC-9700 Instruction Manual page 12

BLC Mode
The backlight correction can be set using the L and R buttons.
Off
Adjusts the best brightness for the entire screen.
On
Automatically corrects the brightness by measuring the light while avoiding extremely bright areas on
the entire screen.
Spot
Automatically selects an area surrounded by a frame on the screen and corrects the brightness so that
the other areas are in the best condition.
When entering SPOT SET, a 9 × 5 grid appears on the screen.
Move the cursor using the U, D, L and R buttons and press the E button at the required position to fill in
the grid. The filled area is excluded from photometry.
Detailed Settings
Based Shutter
ALC (Auto Lens Control) is controlled by the Lens Iris, Shutter Speed and Gain. When the amount of
light input is large (bright), narrow the iris or increase the shutter speed; on the contrary, when the amount
of light input is little (dark), open the iris or decrease the shutter speed. The Based Shutter value
configured will become the amount of light between these two conditions. The configured range is 1/60
to 1/10000 for the 59.94 Hz system and is 1/50 to 1/10000 for the 50 Hz system.
Flickerless
Allows you to turn on or off the flicker improvement function.
0 Fixed at 1/100s for the 59.94 Hz system and 1/60s for the 50 Hz system
Day/Night
Allows you to select a IR cut filter switching specification from the following modes.
Color
Outputs color images (with IR cut) at all times.
B/W
Outputs monochrome images (without IR cut) at all times.
Auto
Automatically switches to color images of high quality during daytime and black-and-white images of
high sensitivity at night.
After selecting this mode, Switch Level (switching brightness level) can be set by pressing the OK
button.
Switch Level Setting
For setting the switching brightness level.
Dark
The switching brightness level is dark.
Mid
The switching brightness level is between Dark and Bright.
Bright
The switching brightness level is bright.
Manual
The switching brightness level is set manually.
Manual Setting
When Switch Level is set to Manual, the following settings can be performed.
Color⇒B/W
Sets the brightness to switch from day to night.
B/W⇒Color
Sets the brightness to switch from night to day.
12