MODMO Saigon+ User Manual page 18

Step 1. Guide the belt onto the chain ring
& sprocket carefully.
3.6. Tyres
The tyres are subjected to inevitable wear due to friction. You can reduce the tyre wear by ensuring optimal air pressure and refraining
from locking the tyres when braking (skidding). You will need to replace your tyres if the rubber tread is worn down, or if the tyres have
become cracked or porous due to ageing and frequent exposure to the sun.
18
M AI N T E NA NCE
Step 2. Carefully insert the wheel axel into
the dropout and align the brake rotor
inside of the brake. If necessary, loosen
the MOD-Nut to make this step easier.
Step 3. Tighten the MOD-Nut using the
MOD-Nut tool and the 16mm spanner
provided in the tool box to 35-40Nm.