Advertisement
WIRING THE CL2000MKII to the Forklift or Loader –
The CL2000MKII fits machines that have 12-24Vdc power supply.
Voltages other than this may require a voltage reducer.
BROWN = Power either battery or ignition
WHITE = Earth
Wiring the Compuload CL4070 Printer (if fitted) –
The Compuload CL4070 Printer can be wired to the CL2000MKII by
the 3-core wire coming from the rear of the CL2000MKII plug. This
wire should be marked "printer".
Brown = Power
White = Earth
Green = TXD
ESTABLISHING A WEIGHING POINT (Static mode)
When weighing in the static method a predetermined weighing point
must be established. The weighing point on a standard forklift is
usually about one meter from ground. For a Loader is when the loader
arms are approx horizontal.
The weighing point is identified by either -
a). Applying stickers to the mast or loader arms (stickers usually
supplied in kit)
b) Welding a pointer to the mast or loader arms identifying the position.
All reference to "Weighing Position" in any instructions means
lifting the forks or bucket to position 1 and lowering slowly to
7
Advertisement
