Troubleshooting - Insignia NS-B1111 User Manual

NS-B1111.fm Page 8 Thursday, February 16, 2006 4:06 PM
To preset as many as 20 FM and AM stations:
1 Press the POWER button to turn your CD boombox on.
2 Press the FUNCTION button to select the tuner mode.
3 Press the STOP/BAND button to select AM or FM.
4 Press REW SKIP/TUNER-DN or FEW SKIP/TUNER-UP button to
select the desired AM or FM station.
5 Press the MEMORY/CLOCK SET button. P-01 flashes on the
display.
6 Press the MEMORY/CLOCK SET button again to set the preset.
7 Repeat steps 2 through 4 to set more presets. You can preset as
many as 20 AM or FM stations.
8 Press M-UP or M-DN to select your preset station.

Troubleshooting

Symptom
CD Player:
CD player won't play.
CD skips while
playing.
Radio:
Noise or sound
distorted on radio
broadcasts.
AM or FM, no sound.
General:
No sound.
8
Possible Cause
CD is not inserted or
is inserted incorrectly.
Disc is dirty or
scratched.
• Station not
tuned correctly
for AM or FM.
• FM: Antenna
wire is not
extended.
• AM: Your CD
boombox is not
positioned
correctly.
Volume is too low.
• Power cord
disconnected.
• No batteries,
dead batteries
or batteries not
installed
correctly.
• Power is off.
www.insignia-products.com
NS-B1111 CD boombox
Solution
Insert CD with label
facing up.
Wipe CD with cloth or
use another CD.
• Retune the AM
or FM broadcast
station.
• Extend FM
antenna wire.
• Rotate your CD
boombox until
best reception is
obtained.
Increase volume.
• Connect power
cord.
• Make sure
batteries are
fresh and
installed
correctly.
• Use the
POWER button
to turn on your
CD boombox.