Table of Contents
Advertisement
3.0 Input and Outputs
Front
FW
Panel
MENU, UP,
DOWN
RST
LCD
Rear
1000BT
Panel
IR-CTRL
IR-IN, IR-OUT
L/R IN, L/R OUT
HDMI AUD
MIC IN
(Receiver only)
HDMI OUT
(Sender only)
HDMI IN
RS-232
USB HOST
USB 1.1, USB2.0
5V DC
4.0 Getting Started
1.
Use Gigabit Switch with IGMPV2 and Jumbo Frame Support
2.
Connect Sender(s) and Receiver(s) to the switch. No DHCP server required,
by default
Fig 2: VERSA-4K-S Front and Rear panel
Fig 3: VERSA-4K-R Front and Rear panel
USB Mini for Front Panel Firmware update
User Buttons for front panel operation
Factory Reset
16x2 Character display for System
Configuration
RJ45 Jack -- Connects to 1G Ethernet
IR Local Control
IR Detector and IR Emitter connections for
Bidirectional Pass-through
3.5mm Jack for Analog Line Input and Line
Output
HDMI Audio extraction
3.5mm Jack for Microphone Analog Input
Video Output
Video Input
RS-232 Phoenix connector for full duplex serial
communication
USB Type B that connects to host PC
USB Type A for USB peripherals
External Power Supply with Locking connector
Auto IP
is enabled.
7
Advertisement
Table of Contents
