Table of Contents
Advertisement
In multicast mode, a receiver in the group can send an EDID Update Request to
replace Custom EIDD with its attached Sink EDID. A Receiver automatically sends an
Update Request when Display is detected, if "Use this EDID" option is enabled. When
multiple receivers send an EDID update request, the last received EDID will be used. In
multicast scenario it is recommended to enabled "Use This EDID" option on only one
receiver.
6.6 Video Scaler
Receiver (VERSA-4K-R) has built-in Video Scaler. The Scaler supports Up-scaling (Low
resolution to High Resolution), Down-Scaling (High Resolution to low resolution) and
Timing Conversion (Interlaced to Progressive and vice versa). See
resolution support list
The Scaler can be set to "EDID Preferred", which will automatically scale the input
video to the native resolution of the monitor as defined in its EDID. This feature
provides the flexibility to use different kinds of monitors at the Receiver end
regardless of brand and 4K resolution support.
Scaler Settings
Output
Timing
6.7 Video Wall
VERSA receiver has built-in Video Wall support with Bezel and GAP compensation,
Pixel Wise panning, Image Rotation and Mirroring. The Video Wall layout is a
rectangular array of monitors, where the position (x', y') of a monitor on the Wall is
identified with row and column number. The total number of rows indicates Vertical
Monitor Count (Y) and the total number of columns indicates Horizontal Monitor
Count (X).
16
Fig 11. EDID Management
for more information.
Pass through
Custom Timing
EDID Preferred
Output same resolution as input
HDMI Video resolution support list
See
Automatically scales the video to the preferred
EDID timing of the sink
HDMI Video
Advertisement
Table of Contents
