Table of Contents
Advertisement
1.
While using Independent Routing, receiver must be a part of a working video
group to output the audio.
2.
Bidirectional Audio Pass-through is only supported in Unicast Mode and
when LINE IN is selected.
Audio Modes
Input Mode
(Sender only)
Output Mode
(Receiver only)
6.10 Keyboard and Mouse Over IP
Keyboard and mouse connected at the receiver end operates differently compared to
other USB2.0 devices. To have instant accesses to the PC, both keyboard and mouse
are always emulated by the Sender and only key and mouse parameters are received
from each Receiver. As result, no explicit connection or driver installation is needed.
In multicast mode, a PC can be controlled using mouse and keyboard from any
receiver in the group. Each receiver has dedicated keyboard and mouse ports to use
feature.
20
Fig 16. Audio Modes
Auto
Auto 1
Auto 2
Dual Output
HDMI Only
Line Out Only
Auto Selects LINE IN when Video Input is
DVI or when LINE IN hot plug is detected
Auto Selects LINE IN when LINE IN hot
plug is detected irrespective of Video Input
Always uses HDMI audio when Video Input
is not DVI.
Also, Auto selects LINE IN when Video
Input is DVI.
Output Audio on both HDMI and LINE OUT
Only output audio on HDMI
Only output audio on LINE OUT
Advertisement
Table of Contents
