Table of Contents
Advertisement
USB2.0 Settings
VERSA-4K-
S
(Sender)
VERSA-4K-
R
(Receiver)
6.12 Serial Over IP
Both Sender and Receiver support two types of modes to control RS-232 devices. In
Pass Through mode, all the bytes from the senders are multicast to all the receivers
in the group, likewise, all the bytes from the receiver is directed to the sender in the
group. The Guest Mode allows 3rd party control systems to control serial devices
over IP. In Guest Mode, a control system can completely take control of the serial port
and can have full duplex serial communication with attached serial devices over
Telnet. See
supported baud rate list
22
Attached Client IP
Auto Connect to
First Peer
USB Incompatibility
Connect/Disconnect
Host IP
Fig 19. Serial Over IP
IP Address of connected Receiver from
which all the USB2.0 devices are being
exported
USB2.0 will be automatically connected
the first Receiver seen in the group
(Useful when there is only one receiver in
the group)
Enable when the mouse is responding
slow
Initiates USB 2.0 Connect/Disconnect
Request. When multiple receivers send
the request only last received will be
successful and others will be
disconnected.
IP Address of connected Sender to
which all the USB2.0 devices are
exported
for more information.
Advertisement
Table of Contents
