Table of Contents
Advertisement
HSM-44-UHD
3.1.5 Making AV Routing or "Ties" from the Front Panel.
Users can initiate "ties" either from the HDMI OUTPUT or INPUT point of view.
For most users it is more logical to initiate ties starting with the OUTPUT.
Think of it as: "I want OUTPUT 1 to get its video from INPUT 2".
3.1.6 Making a tie starting from the OUTPUT.
To tie an output to an input, use the following steps:
1. Press the desired output button. The button for the currently tied
INPUT will light up.
2. Press the input button you want to tie to. This selected input button
will start blinking. The blinking button designates it as a "desired"
choice; the actual tie is not made until the SET button is pressed.
3. Press the SET button. If you do not press the SET button with ~5
seconds, the process will time out and the button LEDs go out.
Example: Route output 3 to input 3 (when currently tied to Input #2)
6
© Copyright 2021 Hall Technologies
Advertisement
Table of Contents
