Table of Contents
Advertisement
3.1.2 Front Panel Operation.
The front panel pushbuttons have built-in LEDs which represent the buttons
state. Button LEDs can be off, blinking or on (solid).
3.1.3 Reading the LCD routing configuration.
Routing information is displayed on the LCD. The 'IN' row on the LCD changes to
represent the current routing status. The 'OUT' values are fixed or show an
output as blank by displaying an 'x' in that position.
In the above example, the routing configuration can be understood from the
output end as follows:
Output 1 is tied to Input 1.
§
Output 2 is tied to Input 1.
§
Output 3 is tied to Input 2.
§
Output 4 is tied to Input 2.
§
3.1.4 Turning the unit on and off.
The system can be turned on and off via the IR Remote Control, RS-232 or
Telnet.
4X4 HDMI Matrix Switch with 4K HDMI
Front panel button LED states
© Copyright 2021 Hall Technologies
5
Advertisement
Table of Contents
