Baltech ACCESS200 Installation Manual page 2

3. Optional: Deploy Prox license
To deploy a Prox license for HID Prox, Indala, or Keri card support, present a BALTECH LicenseCard
to each reader. Successful deployment is signaled by a yellow and green LED sequence.
Learn more:
docs.baltech.de/licensecard
4. Deploy configuration
BEC2 file
Deploy via the Windows tool "Uploader" (part of
Option How it works
Wired Connect the reader to your
upload laptop via USB or RS-232.
Wireless Connect a transfer reader to
upload your laptop to upload the
- Beta - configuration wirelessly via
NFC to the target reader.
Create Load configuration onto a
ConfigCard ConfigCard. When created,
- Beta - present the card to each
reader. Successful
deployment is signaled by
yellow and green LED
sequence.
BEC file
Deploy via wired upload only. See description in table above.
ConfigCard
Present to each reader. Successful deployment is signaled by yellow and green LED sequence.
Learn more:
docs.baltech.de/deploy
Beta options are not yet included in the online documentation.
5. Test configuration
You can now use a test project card to verify the setup.
Support
+49 811-99881-0 | support@baltech.de
BALTECH AG Phone:
Lilienthalstrasse 27 Fax:
85399 Hallbergmoos Mail:
Germany Website:
BALTECH
Requirements
Any ToolSuite version
•
ToolSuite: v.4.26.00 or above
•
Target reader: firmware 1100 v.2.00.00 or above
•
Transfer reader:
•
ID-engine ZB Brick, ISO product line (10115).
•
LEGIC readers (10117) will not work!
Position the transfer reader on top of the target
reader and align antenna centers (i.e., card
symbols on front stickers). Tolerance is 10 mm
max. in each direction.
ToolSuite: v.4.26.00 or above
•
Reader to write config to card:
•
ID-engine ZB Brick, firmware 11.23.01 or above
ConfigCard: BALTECH ConfigCard v2 or blank
•
MIFARE DESFire card (EV1 or above)
Target reader: firmware 1100 v.2.00.00 or above
•
+49 (811) 99 88 1-0
+49 (811) 99 88 1-11
info@baltech.de
www.baltech.de
ToolSuite).
v1.1
p 2/2